-
Mods: DIY Anti-Lift (02-07 WRX/STi)
Overview I have been looking around for an Anti-Lift Kit (ALK) that uses pillow ball bushings over polyurethane. I’m not a huge fan of poly in control arm bushings even though it would probably fine. I just would like to keep any suspension bind to a minimum. The only pillow ball setups I could find…
-
Install: SSR GT2 17×8.5 +48mm Wheels [Part 2]
Wheel Specs SSR / GT2 / 17×8.5 / +48mm / 5×100 / 16 lbs Tire Specs BFGoodrich / Comp-2/AS / 255/45/R17 With my tires delivered and a winter storm looming, I messaged my friend David who works at an automotive shop to see if he could fit me in. As luck would have it, the…
-
Install: SSR GT2 17×8.5 +48mm Wheels [Part 1]
Wheel Specs SSR / GT2 / 17×8.5 / +48mm / 5×100 When my wheels arrived (well half of them at least) and I went ahead and bolted one of them up to see how it would look on the Bugeye. In the pics, at least from certain angles, the wheel design looks a little flat.…
-
Install: [DIY] Subaru Transmission Mount
I decided to make my own transmission mount since it is cheaper than buying aftermarket transmission mount and I can choose the durometer of the urethane. I am currently running a Torque Solutions transmission mount and one of the studs is loose and won’t fully tighten. Other than the loose stud, the mount is obnoxious…
b.obsdian | b.orginal 