Skip to content

B.黒曜石

b.original

  • Home
  • Installs
    • Mods
    • Retrofits
    • Maintenance
  • Bugeye on a Budget
  • Feature
    • Drives
  • Resource
    • Data
  • Instagram
  • Flickr
  • Email

Tag Archives: Subie

Install: v7 JDM STi Grill Mods (Part 2)

Picking up where I left off on the v7 JDM STi grill in Part 1, it’s now time to remove the drift stitches and make this piece structurally whole again. Or at least attempt to. The first area I wanted to address was the crack below the main stitches. With a sharp blade, I removedContinue reading “Install: v7 JDM STi Grill Mods (Part 2)”

Install: eBay v2 Lip Modification (Part 1)

A while back I picked up a v2 replica lip off of eBay. I usually don’t run a lip on my cars as Subies have a good amount of front overhang; I like to lower my cars and Knoxville has a lot of extreme elevation transitions, with my driveway being one of the worst offenders.Continue reading “Install: eBay v2 Lip Modification (Part 1)”

Install: v7 JDM STi Grill Mods (Part 1)

I picked up this broken JDM STi grill over the winter with the intention of modifying it to my liking. It was relatively cheap to modify without too much anxiety. My goal was to document the process, then I got completely sidetracked by school and other mods. So I am trying to get the blogContinue reading “Install: v7 JDM STi Grill Mods (Part 1)”

Install: Blitz Nur-Spec Axle Back

After the Carbon Fiber Driveshaft install, my exhaust note somehow became extremely quiet. I don’t need a super loud exhaust, but I do like to be able to hear it without straining my ears. I initially wanted a Delta Motorworks CBE, but it’s nearly $1,000 and I honestly don’t know what it would sound likeContinue reading “Install: Blitz Nur-Spec Axle Back”

Install/Review: DSS Carbon Fiber Driveshaft

The spring semester is almost over and during that time, Blipshift made another run of the Gutentight shirts. Thank you to everyone that bought a shirt, that money helps purchase more car parts! And while it wasn’t enough to by a Carbon Fiber Driveshaft outright, it did provide a steep discount. 😉 View this postContinue reading “Install/Review: DSS Carbon Fiber Driveshaft”

Install: Subtle Solutions Fender Braces

Fender braces are one of those modifications that provide a great bang for the buck. They can be had for around $100 and the steering feel/handling upgrade is similar to that of improving throttle response. If you like suspension response mods, put this one on your list. The only downside is the installation. You can installContinue reading “Install: Subtle Solutions Fender Braces”

Rumbles: Bugeye on a Budget

This is going to be a new series of low-cost mods I am going to be doing to my 2003 WRX. The criteria for this series are mods that cost under $50; ideally under $50 shipped. I want to do a “Bugeye on a Budget” mod at least once or twice a month and IContinue reading “Rumbles: Bugeye on a Budget”

B.黒曜石, Create a website or blog at WordPress.com
  • Follow Following
    • B.黒曜石
    • Join 42 other followers
    • Already have a WordPress.com account? Log in now.
    • B.黒曜石
    • Customize
    • Follow Following
    • Sign up
    • Log in
    • Report this content
    • View site in Reader
    • Manage subscriptions
    • Collapse this bar